NEW YORK MATT ANTI-SLIP CONCRETE-EFFECT PORCELAIN TILE BY VIVES

New York matt anti-slip concrete-effect porcelain tiles by Vives

The New York matt anti-slip concrete-effect porcelain tile collection by Vives brings the restrained character of cement-inspired surfaces to terraces, porches, entrances, patios and areas exposed to moisture through its R10 and R12 finishes. The collection combines a calm urban aesthetic with surfaces designed to provide greater safety in spaces where the conditions of use require a specific anti-slip response.

New York does not imitate an excessively cold industrial concrete or a deliberately distressed surface. Its design is based on discreet mineral variations, subtle changes in intensity and a controlled graphic appearance. This makes it possible to create contemporary outdoor floors with a clear architectural presence without allowing the surface to dominate the rest of the project.

The New York R10 and New York R12 versions preserve the visual identity of the collection and allow different areas to remain coordinated. The finish should be selected according to the characteristics of the location, exposure to water, slope, expected foot traffic and the technical requirements of the project. The choice therefore goes beyond colour and format: the surface must be appropriate for the specific application.

Two levels of anti-slip performance: R10 and R12

The collection includes anti-slip finishes with different levels of performance. The R10 finish is designed to improve grip in walkable areas where moisture may be present or where a safer texture is required than that of a conventional interior finish. It is especially appropriate for covered terraces, porches, entrances, professional kitchens, shared areas and transitional spaces between indoors and outdoors.

The R12 finish provides a higher anti-slip response and is intended for areas where exposure to water or moisture may be more demanding. Its texture is more pronounced and should be considered as part of the technical planning of the floor, particularly in outdoor projects, areas close to swimming pools and surfaces requiring a higher level of safety.

R10 and R12 should not be treated as equivalent finishes selected solely according to appearance. Each one responds to a different level of use. The final choice should always be adapted to the actual location, the applicable regulations and the recommendations of the professional responsible for the project.

A concrete aesthetic designed for outdoor architecture

The New York concrete effect provides a neutral base capable of working with many architectural styles. Its matt surface complements white façades, concrete walls, stone cladding, dark joinery, metal pergolas, outdoor furniture and timber features without competing with them.

On a contemporary terrace, the flooring can extend the architecture and help organise seating, dining and circulation areas. In a garden, its mineral appearance creates a balanced transition between the building and the landscape. In hotels, restaurants and commercial premises, New York provides a restrained background on which the project can develop its own identity through furniture, lighting and planting.

The subtle graphic allows the collection to be used across large surfaces. The floor retains depth and variation without creating an overly obvious repeated pattern. This is especially valuable on spacious terraces where the flooring should remain visually interesting without becoming excessively decorative.

Blanco, Natural, Gris and Grafito: four interpretations of outdoor space

The colours Blanco, Natural, Gris and Grafito make it possible to adapt the concrete effect to different architectural settings. All four share a contemporary mineral aesthetic, although each one changes the brightness, temperature and visual intensity of the floor.

New York Blanco is the lightest interpretation in the range. It supports bright compositions, Mediterranean façades and terraces where a greater sense of space is required. It can be combined with pale timber, beige stone, white furniture, natural fibres and planting to create relaxed environments.

New York Natural introduces a warmer and more balanced tone. Its character recalls sand, pale mortars and mineral materials associated with Mediterranean architecture. It works naturally with timber, limestone, earth-toned fabrics and cream finishes, creating a gentle transition between the building and the surrounding landscape.

New York Gris offers the interpretation most directly linked to contemporary concrete. Its neutrality makes it easy to coordinate with steel, aluminium, exposed concrete, timber and stone cladding. It suits modern homes, urban terraces, restaurants and commercial areas without imposing too strongly on the rest of the design.

New York Grafito adds greater depth and a stronger architectural presence. The dark tone can create contrast with pale façades, white walls, timber furniture and vegetation. It also supports more urban and sophisticated outdoor schemes, especially when combined with black profiles, linear lighting and metal elements.

Large formats and visual continuity on terraces

The New York collection is available in different sizes, including large formats that reduce the visual fragmentation of the floor. Larger tiles create a more continuous reading of the surface and allow the concrete effect to be perceived as an architectural plane rather than a sequence of small modules.

On open terraces, formats such as 80x80 or 120x120 provide a particularly contemporary scale. The joints become less prominent and the mineral graphic extends more continuously. This works especially well in clean-lined homes, hotels, restaurants and outdoor areas designed to connect with large glazed openings and clearly defined architectural volumes.

The 60x60 format offers a more compact and versatile module. It adapts easily to patios, porches, entrances and terraces of more limited dimensions. Its square geometry helps organise the area and resolve different layouts while preserving the restrained identity of the collection.

The availability of each anti-slip finish depends on the selected colour and size. Before finalising the project, it is important to confirm which specific combinations are offered in R10 or R12 and to select the appropriate option for the surface being tiled.

Matt finish with texture integrated into the design

The matt finish reinforces the mineral appearance of New York porcelain stoneware. The surface avoids strong reflections and distributes light more softly, which is particularly useful on terraces exposed to direct sunlight. The floor maintains a stable appearance and coordinates easily with outdoor materials of different kinds.

In the anti-slip versions, the texture is not simply an added decorative effect. It forms part of the surface and serves a specific function. Its purpose is to improve the behaviour of the floor under the expected conditions of use while preserving the concrete-inspired appearance and colour consistency of the collection.

The R12 finish has a more pronounced texture than R10. This difference can influence the visual appearance, the sensation underfoot and the cleaning requirements. The choice should therefore take into account both the required performance and the type and frequency of use.

Terraces and porches with architectural continuity

On residential terraces, New York creates a restrained floor that does not compete with views, furniture or vegetation. Blanco and Natural support bright Mediterranean environments, Gris creates a neutral urban base and Grafito introduces a deeper, more contrasted surface.

The flooring can extend beneath a pergola, surround a dining area or connect different seating zones. Using the same colour throughout strengthens continuity, while the selected anti-slip finish adapts the surface to the conditions of each area.

On covered porches and protected entrances, an R10 version may offer the appropriate balance between a concrete aesthetic and an anti-slip texture. In areas more exposed to rain, water or demanding conditions, an R12 surface may be necessary. This decision should take slope, drainage and intended use into consideration.

Pool surrounds and areas exposed to water

Swimming pool surroundings require particularly careful planning. The continuous presence of water, barefoot use and changes in level make it essential to assess the required anti-slip class for each area. New York R12 versions allow the concrete-effect aesthetic to continue into spaces where a higher-grip surface is needed.

The colour range facilitates integration with the pool design. Blanco and Natural create bright environments and work with pale stone, planting and water. Gris offers a more contemporary appearance, while Grafito can be used to create stronger contrast.

When a dark porcelain tile is considered for a highly exposed sunny area, the possible surface temperature should also be taken into account. The choice cannot be based on colour alone: orientation, climate, drainage, use and maintenance should all form part of the final decision.

In any pool environment, the finish should be selected according to the applicable regulations and the instructions of the responsible technician. The R12 classification provides a reference for anti-slip performance, but it does not replace a specific assessment of the location.

Entrances, ramps and transitional spaces

Outdoor entrances connect the street, garden, garage or terrace with the interior of the building. These areas may collect water, dirt and moisture, so the flooring must be chosen with particular care. New York allows these surfaces to be resolved while maintaining a coherent relationship with the architecture.

In covered entrances, outdoor corridors and circulation areas, the R10 finish may provide an appropriate texture where conditions are not extreme. On ramps or more exposed and sloping surfaces, it may be necessary to consider R12 and verify the relevant technical requirements.

The modular layout helps organise circulation. Square formats reinforce the geometry of the entrance, while colour can extend the façade or create controlled contrast. Gris and Grafito strengthen an urban character; Blanco and Natural soften the transition towards gardens and Mediterranean-style homes.

Restaurants, hotels and commercial terraces

In hospitality, restaurant and commercial projects, the outdoor floor forms part of the customer experience. It should contribute to the identity of the establishment, organise circulation and withstand frequent use. New York combines a restrained appearance with the possibility of selecting anti-slip surfaces according to the needs of each area.

On restaurant terraces, the concrete effect creates a neutral base for tables, chairs, planting and lighting. Natural creates a warmer atmosphere, Gris adapts to urban concepts, Blanco favours bright spaces and Grafito adds intensity and a more dramatic character.

In hotels, the flooring can be used in entrances, patios, bedroom terraces, shared areas and spaces close to the pool. Maintaining the same colour family across different zones helps establish a coherent architectural language, while the R10 and R12 finishes allow the surface to be adapted to different conditions of use.

Continuity between indoor and outdoor spaces

One of the most valuable features of the collection is the possibility of maintaining a common aesthetic between interior and exterior spaces. The concrete effect acts as a visual link, allowing the living room, kitchen, porch and terrace to be perceived as parts of the same project.

This continuity does not necessarily require the same finish in every area. The interior may need a smoother surface, while the exterior requires an anti-slip version. Keeping the same colour and coordinated graphic preserves visual unity while adapting performance to each location.

This approach is especially effective in homes with large windows or sliding doors. When indoor and outdoor surfaces share the same tone, visual boundaries are reduced and the daytime living area appears to extend towards the terrace. The flooring becomes an element connecting architecture, landscape and interior design.

Combinations with stone, timber, metal and planting

The neutrality of New York makes it easy to combine with other materials. With timber, the ceramic concrete creates a contrast between mineral and organic surfaces. With stone, it develops a highly natural architectural palette. Metal profiles and black joinery reinforce its contemporary character.

Blanco and Natural work well with pale woods, woven fibres and beige stone. Gris coordinates with concrete, steel and aluminium. Grafito creates defined contrasts with timber, pale walls and greenery. The selected colour can guide the project towards a Mediterranean, urban, minimalist or natural aesthetic.

Planting also changes the perception of the floor. Intense greens stand out against Blanco and Grafito, while Natural creates a softer transition with earth, gravel and dry landscaping. Gris acts as a neutral base capable of integrating different plant species and materials.

Maintenance and informed surface selection

Anti-slip finishes have a more pronounced texture than conventional interior surfaces. This characteristic is part of their function and should be considered when planning cleaning and maintenance. The more textured the surface, the more important it is to use suitable methods and products to prevent dirt from accumulating.

The slope, drainage system and quality of installation are as important as the tile itself. An anti-slip product cannot, on its own, correct a project with insufficient drainage, incorrect levels or poor installation. All of these elements should be studied together.

It is also advisable to verify the actual availability of formats, colours and finishes before approving the final composition. Not every size is necessarily manufactured in every version. Early planning avoids later changes and ensures that the design is based on references that are genuinely available.

An anti-slip porcelain tile with a clear architectural purpose

The New York matt anti-slip concrete-effect porcelain tile collection by Vives makes it possible to design contemporary outdoor areas where appearance and performance belong to the same concept. Its mineral graphic adds depth, the colours coordinate with a wide range of materials and the R10 and R12 finishes respond to different levels of requirement.

Blanco provides brightness, Natural introduces warmth, Gris expresses the character of contemporary concrete and Grafito creates deeper compositions. The available formats make it possible to adapt the layout to small terraces, patios, extensive outdoor areas, hotels, restaurants and residential projects.

The choice between R10 and R12 should be based on the actual conditions of the space rather than appearance alone. Moisture, slope, traffic, exposure to water and regulations determine the appropriate surface. Once these factors have been assessed, New York provides a coherent ceramic base for connecting indoor and outdoor areas, organising the architecture and creating safer spaces with a restrained, durable and recognisable aesthetic.