Benfergrip Porcelain Adhesive Benfer C2TE 25kg bag

New product

7.9 €/unit 

BENFERGRIP C2TE is a highly thixotropic powder adhesive, formulated with highly resistant cements, quartz of selected granulometries, synthetic resins and newly created special additives. The product has been thought and developed for the quick and safe laying even from top to bottom of all kinds of ceramic and tiles

More details

Origin manufacturer Spain
Unit of measure /unit
Bag 25 kg

Special adhesive with zero vertical slip and long application time

• To superimpose on old floors indoors
• Extra white
• High slip resistance
• Installation without the need for spacers
• Ideal for glass and ceramic mosaics
• Ideal for klinker and thick tiles
• Its soft consistency reduces effort
• Long application time
• FLEXSIBLE, deformity> 1.8 mm
• Tested according to European standard EN 12004, C1 TE
• With CEMLATEX 600 tested according to European standard EN 12004, C2 TE S2


TECHNICAL CHARACTERISTICS: BENFERGRIP C2TE is a highly thixotropic powder adhesive composed of highly resistant cement, quartz of selected granulometry, synthetic resins and newly created special additives.

• Its composition has been thought and developed for the quick and safe installation, even starting from the top, of all ceramic materials.
• Layouts can be made without the need for spacers to hold the tiles or lay from the top.
• BENFERGRIP C2TE has a long application time, essential to fully cover the back of the tiles thanks to the special components with which it is added, being able to use it with a softer consistency compared to normal glues, without it being visible. vertical grip affected.
• BENFERGRIP C2TE white does not contain sand, so it is also especially suitable for laying glass mosaics.

FIELDS OF APPLICATION:

Installation of porcelain stoneware, non-absorbent single-fired tiles, vitreous and ceramic mosaic and natural stone stable against humidity in:
• floors and coverings, interior and exterior
• public and private swimming pools by adding CEMLATEX 600 WORK REPORT: Ceramic floors and wall tiles must be laid with a one-component, polymer-modified, cement-based adhesive, applicable with a trowel in thicknesses up to 10 mm, with vertical sliding null and in accordance with standard EN 12004 class C1TE type BENFERGRIP C2TE from Benfer srl


SUPPORTS ALLOWED

• Concrete
• Cement-based leveling mortars, with and without heating with water system or with electrical resistance
• Cement-based plasters
• Flexible waterproofing based on cement and polymers (ACQUASHIELD-2KF)
• Cement blocks including cellular concrete Interiors
• Self-leveling cement-based mortar (after applying a specific primer if necessary), with and without heating with water system
• Anhydrite-based fluid mortar (after applying a specific primer),
• with and without heating with water system
• Old tiles (after applying a specific primer)
• Standard or waterproofed plasterboard
• Elastomeric waterproofing membranes (ACQUASHIELD GEL) *
• Gypsum-based panels (after applying STARPRIM OR BENFERPRIM) * Mixed with CEMLATEX 600 MAXIMUM FORMATS


ACCEPTED:

• Interior floors with maximum length of the longest side up to 90 cm
• Exterior floors with maximum length of the longest side up to 45 cm
• Interior cladding with maximum length of the longest side up to 60 cm
• Exterior cladding with maximum length of the longest side up to 30 cm Check the format limits based on the cladding type and the support in the table in the selection guide MAXIMUM FORMATS ALLOWED WITH CEMLATEX 600 (25kg BENFERGRIP 5 kg CEMLATEX 600)
• Interior floors with maximum length of the longest side up to 360 cm • Exterior floors with maximum length of the longest side up to 120 cm
• Interior linings with maximum length of the longest side up to 360 cm
• Interior cladding with maximum length of the longest side up to 120 cm Check the format limits based on cladding type and support in the table in the selection guide

MODALITY OF USE AND CONTRAINDICATIONS:

The substrates must be solid, capable of resisting the load of the coating, free of oil, grease and dust. Any paint that may be present must be in optimal condition, clean and free of grease, otherwise it is essential to completely remove it from the plaster. Do not use on gypsum or anhydrite substrates or on specially absorbent substrates without having previously treated them with BENFERPRIM.

No customer reviews for the moment.

Write a review

3 other products in the same category